NAVCO® is the exclusive distributor for AViTEQ rotary electric vibrators, also known as unbalanced motors or electromechanical vibrators, for Canada, Mexico, and the United States. Available in a wide range of sizes and force outputs, these rotary electric vibrators can handle a wide range of applications. From light duty material flow solutions to powering heavy-duty vibratory equipment, NAVCO has the right rotary electric vibrator for your application.
Rotary Electric Vibrator
Power Vibratory Equipment
and Material Flow Solutions
Time Tested Industrial Electric Vibrators
With over 20 years’ experience in partnership with AViTEQ, NAVCO supplies rotary electric vibrators (unbalanced motors) with a robust design and attention to detail. This combination ensures superior product quality and long operational life even in the toughest of conditions.
Driving Multiple Industries
Rotary Electric Vibrators can be found across a wide range of Industries including:
Power / Coal Mining & Aggregates
Chemicals & Pharmaceutical Foods
Recycling Plastics & Glass
Construction & Cement & More
Electric Power
Electric vibrators designed for continuous operation.
Centrifugal force range: 40 – 119,000 N
Temperature range: -20 °C – + 40 °C / + 55 °C
Mains connection: Single and Three-phase for all conventional voltages
50 or 60 Hz
Designed for
Powerful and Reliable Performance
- Thermistor
Thermistor protection as standard from model size UVA. Easy operation with speed controller.
- Terminal Board
6-pin fully mounted (voltage up to 690V without additional insulation).
- Cable Gland
Simple electric connection (IP 66), second separate cable gland for thermistor connection.
- Unbalanced Weights
Adjustable and permanent legible setting scale that allow for quick and precise settings.

- Cover
Easy handling. Dustproof and waterproof by o-ring flange seal.
- Winding
Embedded in high quality resin; resistant to vibration, moisture and dust; armature shaft made of alloy steel.
- Mounting
Tall feet for the extension of mounting screws; mounting in any position possible; suitable for high stress and large thermal reserve. Reliable with high levels of stress and long lasting.
- Ball/Roller Bearings
Oversized ball/roller bearings and continuous lubrication or re-lubrication option.
Hazardous Area Ready
Suitable for use in hazardous areas, there is a rotary electric vibrator model to meet the safety standards required in your application:
CSA
Class 1 Div. 1, Class 1 Div. 2,
Group A, B, C, D,
Class 2 Div. 1,Class 2 Div. 2,
Group E, F, G
ATEX
Zone 21 & Zone 22
IP 66 to EN 60529

Built For Continuous Operation
Vibrators that work as hard as you do. Designed for continuous operation Rotary Electric Vibrators keep up with your 24 hr. production process.
Adjustable Force Output
Rotary electric vibrators feature adjustable flyweights for force output adaptability. Fine-tune the force output of each motor to fit the specifications required by the task at hand.
Up to 27,000 Pounds of Centrifugal Force
Big challenges require big solutions. Our rotary electric vibrators provide up to 27,000 pounds-force. This makes them an ideal, low maintenance solution for driving large equipment.

Have a Question?
NAVCO has a team of experts with the knowledge and experience to select the right rotary electric vibrator for your application.
An Unbalanced Motor to
Drive Vibratory Equipment
Three Types of Motion Rotary Electric Vibrators Drive

Elliptical Motion
A single drive unit mounted away from the center of gravity produces elliptical movement. This motion can be used for compaction or agitation on:
- Inclined screens
- Vibratory tables and packers
- Shakeouts
- Bin dischargers

Circular Motion
A single drive unit mounted at the center of gravity produces circular motion. This arrangement can be used to drive:
- Circular screens

Linear Motion
By using two NAVCO motors, rotating in opposite directions and mounted on a common beam, linear motion is produced. This type of arrangement is used for:
- Feeders
- Screens
- Grizzlies
- Conveyors
Reliable and Low Maintenance
Designed to just work, NAVCO Rotary Electric Vibrators are reliable, low maintenance electromechanical unbalanced motors. This combination makes them the ideal motor to drive vibratory equipment even in the toughest of environments.
Wide Range of Motor Sizes
From light duty to heavy duty applications, NAVCO has a Rotary Electric Vibrator to drive the vibratory equipment your process requires.

Mountable
With tall feet and a common bolt hold pattern, these motors can be utilized as replacement vibrator motors for your current vibratory equipment.
Adjustable to the Application
Adjustable weights allow the motors to provide the precise vibration necessary to drive your vibratory equipment.

Start Your Next Project Today!
A Bin Discharge and
Material Flow Solution
A Frequency and Amplitude for Every Problem
With numerous models to choose from and force output adjustability, these motors can be applied with precision to suit the exact requirements of the bin and material flow problem at hand. For assistance in sizing and applying, please contact NAVCO today!
Reliable Material Flow
A rugged, industrial, and totally enclosed design offers long operating life even in harsh environments. Small to medium size models are commonly utilized in flow aid applications to eliminate material bridging and rat holing.
Increased Safety, Less Noise
Motors produce low noise levels and arrangements are available for operation in hazardous environments.

A Rotary Electric Vibrator
for Every Application

2 Pole / 3600 RPM
UV1A 0.04Y
UVA 0.6Y
FUVB 1Y
FUVB 1.9Y
FUVC 3Y
FUVD 5Y
FUVE 7.7Y
FUVE 11Y
FUVF 20Y
FUVG 32Y
FUVH 40Y
FUVL 62Y
FUVL 88Y
4 Pole / 1800 RPM
FUVB 0.3X
FUVB 0.7X
FUVC 1.5X
FUVC 2.1X
FUVD 4X
FUVD 5.4X
FUVE 7X
FUVE 10X
FUVF 18X
FUVF 24X
FUVG 38X
FUVH 49X
FUVL 64X
FUVN 83X
FUVP 112X
6 Pole / 1200 RPM
FUVE 3W
FUVE 5W
FUVF 11W
FUVF 16W
FUVG 21W
FUVG 30W
FUVH 38W
FUVH 46W
FUVL 64W
FUVK 79W
FUVN 95W
FUVP 119W
8 Pole / 900 RPM
FUVF 6V
FUVF 9V
FUVG 14V
FUVH 21V
FUVH 26V
FUVL 36V
FUVK 44V
FUVN 76V
FUVP 85V
Centrifugal force range:
40 – 119,000 N
Working moment:
0.08 – 2.763 kgcm
Working weight:
1 – 11,250 kg
50Hz & 60Hz Options Available
Mains connection:
Three-phase current/alternating current
Rated Power:
0.03 – 10,000 W
Temperature range:
-20 °C – + 40 °C / + 55 °C
(Special temperature options available contact NAVCO for more information)